How to set up an Apache web server on Raspberry Pi

akramali123yt

Usually web developers use local web servers, on these servers web developers can view their projects in order to see the effect their projects would have on the user. For this purpose, we can use ARM cards (Raspberry PI, Orange Pi, Pirock) These ARM cards have endless uses, ranging from a small computer to carry anywhere, to creating our own network attached storage (NAS) server.

To carry out the web server project, in this case we will Whatsapp Number List use the ARM board Raspberry Pi 3. This device is an ARM architecture board, that is, a very small computer. The main purpose of the Raspberry Pi was to encourage computer science education.



The main utility of this web server is that developers can locally test their web projects developed in HTML, CSS and PHP, and thus have an overview of the status of their projects without having to go into production.

Before we start putting our web server on a Raspberry Pi, we need to follow a few small instructions to start the web server installation:

Minimal knowledge of Linux and its terminal
Our ARM card must have a Linux system installed on the SD card (Raspbian, Ubuntu Mate, Linux Mint, etc.)
LAN connection and Internet connection on our Raspberry


Steps to prepare the Raspberry Pi
First of all, we will start by preparing the Raspberry Pi to do our web server development. So we need to update all the drivers and packages for our Linux OS. To do this, we will open a terminal window and run the following commands:

sudo apt update
sudo apt upgrade -y

The commands may differ depending on the distribution we are using, the previous commands will work on distributions derived from Debian, for other distributions we will only have to find which command is the package manager. The packages we will use will be Apache to build the server, PHP for our web projects and MySQL to manage our databases. As an additional package, we will use an FTP server to establish connections to the web server and manage files locally or remotely.

Once both commands are complete, we will prepare the network interface to assign a local static IP address to the ARM card, although we can also use static DHCP from our router. To do this, you need to modify the "interfaces" file in the /etc/network/interfaces path.